TODO CHECK THIS. (deactivated)

Stationary operating behaviour

Call: Rotating Machine (r/phi-coordinate-system)

Data for the “Calc. T;V ..(n) curves” procedure

Example for the call:

m.move_action       =        0.000  -- Move Action: rotate=0; linear=1
m.arm_length        =      100.000  -- Effect. armature length          [mm]
m.num_pol_pair      =        2.000  -- Number of Pole pairs           (>= 1)
m.npols_gen         =        1.000  -- Number of Poles simulated      (>= 1)
m.speed             =     3000.000  -- Speed: rotate                 [1/min]
m.skew_angle        =        0.000  -- Skew angle                  [Deg; mm]
m.nu_skew_steps     =        0.000  -- No of skew sect:>0:finite;0:infinite
m.eval_force        =        0.000  -- Evaluate force density: no = 0;yes >0
m.current           =       20.000  -- Nominal stator coil current(Peak) [A]
m.angl_i_up         =        0.000  -- Angle current I vs. voltage Up  [Deg]
m.num_par_wdgs      =        0.000  -- Number of parallel Windings   (>= 1)
m.magn_temp         =       20.000  -- Temperature Magnet            [Deg C]
m.fc_radius         =       34.250  -- Radius air-gap center (torque)   [mm]
m.optim_i_up        =        0.000  -- Optimize < I vs Up : no = 0; yes > 0
m.calc_fe_loss      =        1.000  -- Calculate Losses:>0; areas>0; no = 0
m.nu_move_steps     =       49.000  -- Number of move steps
m.range_phi         =      180.000  -- Move range angle
m.phi_start         =        0.000  -- Start angle
m.pm_eff_aktiv      =        0      -- keine interaktionen


m.fc_mult_move_type =        1.     -- Type of move path in air gap
m.fc_force_points   =        0.000  -- number move points in air gap


m.pocfilename    = 'xyz.poc'
run_models("pm_sym_fast")