Rotor ----- Rotors have a excitation or short circuit cage winding and following basic parameters and slots: ============== ================================ ======= Parameter Description Default ============== ================================ ======= mcvkey_yoke Name of lamination material dummy mcvkey_shaft Name of shaft material dummy fillfac stacking factor of lamination 1.0 nodedist Factor for node distance 1.0 ============== ================================ ======= .. Note:: * the mcvkey parameters either reference a filename without extension (Example 'M330-50A') which must be found in the directory defined by the parameter magnetizingCurves of the Femag constructor or the name of an entry in the :ref:`magnetizingCurve` object. rot_hsm ~~~~~~~ .. image:: ../slot-parameters/rot_hsm.svg ============== ====== ====== ============================================= Name Unit Comment ============== ====== ====== ============================================= gap_pol_shaft m core_height HPK m pole_height HPO m pole_rad RPS m core_width2 BPK2 m core_width1 BPK m pole_width_r BPSS m pole_width BPSU m slot_width BDNS m slot_height HDNS m damper_diam DD m damper_div TAUD m ============== ====== ====== ============================================= rotorAsyn ~~~~~~~~~ .. image:: ../slot-parameters/asynRotor.svg ============== ====== ====== ============================================= Name Unit Comment ============== ====== ====== ============================================= slot_bs2 BS2 m slot_hs2 HS2 m slot_b32 B32 m slot_h32 H32 m slot_b42 B42 m slot_h42 H42 m slot_b52 B52 m slot_b62 B62 m slot_h52 H52 m slot_h62 H62 m slot_h72 H72 m ============== ====== ====== ============================================= rotorKs2 ~~~~~~~~~ .. image:: ../slot-parameters/rotorKS2.svg ============== ====== ====== ======================= Name Unit Comment ============== ====== ====== ======================= slot_angle ALPHA deg slot_height H m slot_topwidth B m slot_width SW m slot_h1 H1 m slot_h2 H2 m slot_r1 R1 m slot_r2 R2 m ============== ====== ====== ======================= ============ =========================================== Name Parameter ============ =========================================== statorRotor3 (same as in :ref:`statorRotor3`) ============ ===========================================